بهینه سازی استفاده از مصالح نوین در ساختمان‌های بلند‌مرتبه شهرهای بزرگ با رویکرد ضایعات صفر نمونه موردی: شهر تهران

نوع مقاله : پژوهشی اصیل

نویسندگان

1 پژوهشگر معماری،دانشگاه آزاد اسلامی واحد تهران غرب

2 استادیار گروه معماری،دانشکده هنر و معماری، دانشگاه تربیت مدرس، تهران

چکیده
اهداف: با وجود نیروهای انسانی و اجرایی بالقوه در ایران، استفاده از مصالح در ساختمان ها جهت کاهش هدر رفت مصالح، با روند بسیار کندی طی مسیر نموده، با توجه به اهمیت ساختمان در فعالیتهای اقتصادی لازم است؛ اقدامات موثری در این زمینه انجام پذیرد. این پژوهش با هدف شناسایی و رتبه بندی شاخص های موثر بر هدر رفت مصالح با توجه مبانی نظری موجود انجام پذیرفته است.

روش­ ها: این پژوهش از لحاظ هدف از نوع تحقیق توسعه­ ای و از لحاظ روش انجام کار، توصیفی و از نوع پیمایشی و اسنادی می باشد. جهت شناسایی عوامل موثر، نمونه ای را از میان جامعه خبرگان وکارشناسان این صنعت با روش نمونه گیری تصادفی ساده انتخاب نموده و داده های مورد نظر با توزیع پرسشنامه جمع آوری شده و با نرم افزار آماری spss مورد تجزیه و تحلیل قرار گرفت.

یافته­ ها: تحقیق نشان داد، که طراحی مناسب توسط مصالح نوین با درصدی معادل 73/74% بیشترین تأثیر را بر میزان کاهش ضایعات ساختمانی دارد. پس از آن، صنعت ساخت با درصدی معادل 65/71% در رتبه دوم ، آموزش با درصد تأثیری معادل 62/70% در رتبه سوم، منابع مالی و توجیه اقتصادی با درصدی معادل 83/64% در رتبه چهارم و در نهایت ذخیره و انبار با 33/63% دارای کمترین تأثیربرافزایش ضایعات می باشند.

نتیجه­ گیری: مسئله تحقیق چگونگی حل مشکلات مذکور به شیوه‌ای علمی و هدفمند آن نیل به الگویی مؤثر به‌منظور بهره‌وری بهینه از مصالح در راستای کاهش هدررفت مصالح است.

واژگان کلیدی: مصالح ­نوین، ساختمان­های بلند مرتبه در شهرهای بزرگ، ضایعات صفر.

کلیدواژه‌ها

موضوعات


[1] Li, N., Han, R., & Lu, X. (2018).» Bibliometric analysis of research trends on solid waste reuse and recycling during 1992–2016. Resources, Conservation & Recycling, 130 109-117.
[2] A review on adoption of novel techniques inconstruction waste management and policy«. Journal of Material Cycles and Waste Management. 11(32), 44-67
Musa, M. F., Yusof, . M. R., Mohammad, M. F. & Samsudin, ( 2016)» [3] towards the adoption of modularconstruction and prefabrication in the construction environmen a case study in malaysia«. ARPN journal of engineering and applied sciences, pp. 8122- 8131.
[4] Najafian Razavi, Ali. Shokoohian,mohammad(1391) Management and solutions to reduce environmental pollution of construction waste and their recycling, The 6th National Congress of Civil Engineering.
[5] Solihin, W. (2015). “A simplified BIM data representation using a relational database schema for an efficient rule checking system and its associated rule checking language”. Ph.D. Georgia Institute of Technology.
[6] Bahrami, Sirvan. Zandi, Nader. New construction materials, Publisher: Salehian, (2019).
[7] Park, J.W., Cha, G.W., Hong, W.H., Seo, H.C,(2014).» A study on the establishment of demolition waste DB system b BIM based building materials«. Appl. Mech. Mater. 522–524, 806–810.
Golabchi, Mahmood. Noorzai, Esmatollah. Golabchi, Alireza. (2017) »[8] Building modeling« Tehran, Tehran University Publications.
[9] Vafamehr, Mohsen. (2012). «New materials and advanced construction methods»[9] Tehran, Fekre no book.
[10] Maghsoodi, Gholamreza. New materials in the building, Armanshahr publication, (2017).
[11] Ghorbanian, Ramezanali. New construction materials and emerging materials, Danesh parvar publication, (2011).
[12] Pirmohammadi. Alipour & Mohammad. Morteza, (2015), Introduction of new methods of construction, comparison of industrial method with traditionalization, International conference on civil architecture and urban development at the beginning of the third millennium, Tehran.
Mortaheb, Mohammad mahdi & kavesian, Amir Ehsan, (2009), »[13] Production and management of construction waste in developing countries ( Case Study:Tehran city) Sharif Scientific Research Journal, Number(15)25, Page 25-32, Tehran.
[14] Jin, R., Yuan, H., & Chen, Q. (2019 ). »Science mapping approach to assisting the review of construction and & demolition waste management research published between 2009and 2018. Resources, Conservation Recycling , 140(May 2018), 175-188.
[15] Begum, R. A. Siwar, C. Pereira, J. J. & Jaafar, A. H. (2006). “A benefit–cost analysis on the economic feasibility of construction waste minimisation: the case of Malaysia”. Resources, Conservation and Recycling, 48(1), 86-98.
[16] Rahnamai, Mohammad taghi, Modiri, Mahdi. Khodashahi, Ali, (2021). Examining the integration factors of Tehran management: Challenges and strategies. Scientific Research Quarterly of Geography and Regional Planning. 11th year, Number3. Page111-133
[17] National mapping of IRAN Agency
[18] Pakkhesal, Elham. Oladi ghadikalai, Jafar. Jalilvand, Hamid & Akbari, Hassan, (2021). Revealing land use changes by use from remote sensing data ( Case Study: Tehran city). Scientific Research Quarterly of Geography and Regional Planning. 11th year, Number 4. Page 278-298.
[19] Langarnejad, Ali. Arghan, Abas. Korkehabadi, Zeinab, (2019), Measurement of physical-environmental index of resilience in urban tissues of Tehran(Case Study: Localities of Tajrish, North Jannatabad & Ferdosi in Tehran city) in order to present vernacular model for sustenance in metropolis cities in Iran. Scientific Research Quarterly of Geography and Regional Planning. 9th year. Number2. Page 699-693.
[20] Kargardan, Mohammad Hossein & Khalil Khalili, Mandana (1395), « Modern material and their impact on sustainable architecture», INThe 3th International research conference in sience and technology, Berlin, German.
[21] Poorsistani, Poopa, Poorsistani, Pooneh, (1394), «The impact of modern materials in order to achive sustainable architecture», International innovative researches done by architectures, civil and urban design professionals.
[22] Elsevier B.V, (2024). » Building Materials in Civil Engineering« Woodhead Publishing Series in Civil and Structural Engineering, 2011, Pages 1-6, 423
[23] Mei Zeng & Huang & Xianggang & Zhang, (2023). »Experiment on the Performance of Recycled Powder of Construction Waste on Adobe Materials«
[24] Przemysław,Łacek.(June,2023):the-ultimate-guide-to-recycled-construction-materials-benefits-types-and-implementation-in-modern-building